Ecler ARQIS Series User Manual

Also see for ARQIS Series: User manual User manual

Contents

Ecler ARQIS Series User Manual Manual pdf 8 page image

8ARQIS SB10: between 150 and 300W RMSARQIS SB15: between 600 and 1000W RMSPO S IT IO NI N GConsider following general rules:Place the speakers on a solid and firm surface. Subwoofers placed directly andhorizontally on the ground have a higher output than hanged or directly on the floor,but vertically. No obstacles should stand between the enclosures and the audience.The high frequencies are very directive compared to the low frequencies, so that anyobstacle will impair their response. In case large audiences must be addressed, abetter long distance sound propagation will be achieved if the enclosures are flownhigh enough.IN ST A L LA TI O NIn the ARQIS series, the best way to install the enclosure was studied for each model.Each model from the ARQIS range is supplied with the optimal installation system.ARQIS205 / ARQIS208 / ARQIS110 / ARQIS 112 / ARQISSB10 / ARQISSB15 also havebuilt-in M8 rigging points for suspension from a compatible structure or "truss" usingsteel cables.IMPORTANT NOTEThe equipment must in no case be suspended using its carrying handles (if any); usethe appropriate accessories for each application. Whenever a ceiling/wall mountingbracket is used, it is mandatory to add a redundant safety system. Use wire ropes,slings or chains of the appropriate diameter to prevent the fall of the speaker in casethe main mounting system is pulled out.