Ecler DAM614 User Manual

Ecler DAM614 User Manual Manual pdf 26 page image

269. SETUP MENUThe DAM614 features a general setup menu (hereinafter SETUP menu), or parameters thatglobally affect the unit, such as the functions assigned to the REMOTE ports, the MUTE portmanagement, the LCD display management, etc.To open the SETUP menu you have to simultaneously press and hold down the left and rightMENU keys. Pressing these two keys simultaneously first opens the Password protection screen to lockthe front panel (see paragraph 10):When this screen appears, and if you want to access the SETUP menu (instead of accessing thepassword protection management, as described in paragraph 10), then you must press the right MENUkey.The new edited values are activated in real time. You can cancel an edit operation, returning thevalue before editing, by pressing SHIFT + CANCEL.To exit the Edit menu and return to the main screen: Press SHIFT + EXIT Stay 2 minutes without operating any control on the front panelThe next page shows the full structure and options of the SETUP menu.NOTES:1. Each of the REMOTE ports 1 to 4 can be connected to a WPmVOL-SR wall panel or similar,which has two rotary controls: a 5-way selector (0, 1, 2, 3 and 4) and a volume control. EachREMOTE port can be programmed to operate in one of the following modes: ALL DISABLED: REMOTE port disabled, no function IN VOLUME:o The volume control acts on the overall volume of the inputs. It is necessary to use theREMOTE INPUTS menu to determine the inputs that will be affectedo The selector is disabled ZONE VOLUME:o The volume control acts on the overall volume of the outputs. It is necessary to use theREMOTE OUTPUTS menu to determine the outputs that will be affectedo The selector is disabled IN SELECTOR:o The selector acts as an input selector: it allows you to choose between OFF and up to amaximum of 4 of the 6 available inputs, for the outputs to which it is assigned. It isnecessary to determine the inputs that will be part of the selection options (REMOTEINPUTS menu) and the outputs that will be affected by the selection (REMOTE OUTPUTSmenu)o The volume control is disabledL O C K M O D EU N L O C K A L L