97.6. CleaningThe front panel should not be cleaned with dissolvent or abrasive substances because silk-printing could be damaged. To clean it, use a soft cloth slightly wet with water and neutral liquid soap;dry it with a clean cloth. Be careful that water never gets into the unit through the holes of the front panel.

IMPORTANT NOTE

INSTALLATION

LINE1, LINE2, LINE3 Inputs

OUTPUTS

POWERING AND OPERATING

Cleaning

FUNCTION LIST

FUNCTION DIAGRAM

CONFIGURATION DIAGRAM

TECHNICAL CHARACTERISTICS

BLOCK DIAGRAM

Ecler HMA120 User Manual

HMA120


Contents Table Of Contents IMPORTANT NOTE INSTALLATION LINE1, LINE2, LINE3 Inputs OUTPUTS POWERING AND OPERATING Cleaning FUNCTION LIST FUNCTION DIAGRAM CONFIGURATION DIAGRAM TECHNICAL CHARACTERISTICS BLOCK DIAGRAM	97.6. CleaningThe front panel should not be cleaned with dissolvent or abrasive substances because silk-printing could be damaged. To clean it, use a soft cloth slightly wet with water and neutral liquid soap;dry it with a clean cloth. Be careful that water never gets into the unit through the holes of the front panel. Previous Next / 46