Eclipse AVN 6600 Installation Manual
Also see for AVN 6600: BrochureOperation guideUser guideOwner's manual
                | |
Remove the pocket and any other accessoriesfrom the center cluster to make room for the mainunit.1Remove the mounting brackets for the pocket.2Attach the brackets to the main unit.3Install the main unit in the vehicle.4Be careful not to forcefully push on the main unit'sdisplay or buttons during installation. This mayresult in damage to the main unit.TipBe sure to use the supplied accessory mountingscrews (Red: M5 x 8) as the mounting screws. Ifany other screws are used, they may damage theinside of the main unit.Tip- 16 -Installing the main unitInstalling the main unit30˚ or lessLevel (reference)Front- Installation angle -To maintain proper function, the main unit must bemounted less than 30 degrees. If the angle is inexcess of 30 degrees, DVD/CD skipping andimproper DVD/CD ejection may occur.TipMounting boltsPocket, etcCenter cluster panelMain unitMounting bracketHex-head bolt(Red:M5 x 8) x 8Hex-head bolt(Red:M5 x 8) x 8Flatheadscrew(Red:M5x8) x 8Select the screws in accordance with the shapesof the screw holes in the mounting bracket.9 1091- Mounting the main unit -English Español Français Italiano Nederlands SvenskaEnglish•• Carefully bind any excess length of wire thatis connected to the main unit and secure itto an area of empty space in the vehicle sothat it does not dislodge or interfere with themain unit or vehicle-side equipment. If thewires are not handled correctly, operatingproblems or short-circuits may occur, andthis may result in the danger of fire or otheraccidents.•• Connect all wires before installing the mainunit.Tip |
Related manuals for Eclipse AVN 6600
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine