Switching Audio Control ModesBASS MID TREB BAL FAD NON-F NF-P LPF LOUD SVC BASS ...Turn the [VOL] rotary knob to the right or left in the audio mode while referring to the table below to adjust thesound.1 Modes will switch in the order shown below each time the [ENTER] button ispressed.Mode Function [VOL] rotary knob/FunctionBASS Adjusts bass level. Turn to the right Emphasizes low sounds.Turn to the left Softens low sounds.MID (MIDDLE) Adjusts middle level.Turn to the right Emphasizes mid rangesounds.Turn to the left Softens mid rangesounds.TREB (TREBLE) Adjusts treble level. Turn to the right Emphasizes highsounds.Turn to the left Softens high sounds.BAL (BALANCE)Adjusts left/right(BALANCE) speakerbalance.Turn to the right Emphasizes rightspeakers.Turn to the left Emphasizes leftspeakers.FAD (FADER)Adjusts front/rear(FADER) speakerbalance.Turn to the right Emphasizes frontspeakers.Turn to the left Emphasizes rearspeakers.NON-F (NON-FADERLEVEL)Adjusts non-faderlevel (for connectedsub-woofer).Turn to the right Increases the sub-wooferlevel.Turn to the left Decreases the sub-woofer level.NF-P (NON-FADERPHASE)The merger of soundbetween the front andrear speakers and thewoofer can beimproved by selectingthe phase. Switch thephase which lets thespeakers combinewithout anydisharmony.Turn to the rightNORMAL(Make the output timingof the front/rear speakersand the woofer thesame.)Turn to the leftREVERSE(Change the phase of theoutput timing of the front/rear speakers and thewoofer.)