36How to use the radioHow to operate the tunerBecause AUTO.P temporarily saves stations for the preset switches, stations savedmanually will remain in memory even if AUTO.P is used. By manually saving stations thatare used regularly, these manually saved stations can be restored even after AUTO.Phas been used, such as after traveling.Touching while AUTO.P is being used or after AUTO.P has been used willreturn the preset memories back to the condition they had before AUTO.P was used.(Doing so will delete the stations saved with AUTO.P.) The flow for switching fromAUTO.P to manual is shown below.AUTO.PAbout AUTO.PTouch AUTO.P(Stations saved by AUTO.P are deleted)Automatically saves stations topreset switchesAUTO.P(starts search)AUTO.P(stops search)Manual Touch until a beepis heardAUTO.P•AUTO.P may not automatically receive stations if radio waves in the surroundingarea are weak.•A station saved by the tuning switch may not match a station saved by AUTO.Peven though the signal is received from the same station.•Due to conditions for receiving radio waves, saved stations may differ evenwhen the AUTO.P switch is operated repeatedly in the same location.•Up to six stations having good reception sensitivity are automatically saved inorder starting from the lowest frequency.•When less than six stations capable of reception are found, nothing is saved forthe remaining preset switches.ATTENTION•Pressing again will turn on theradio and resume reception of the radiostation (frequency) received beforepower was turned off.PWR1 Press .PWRTurning off the radio
