Eclipse AVN4430 Owner's Manual

Also see for AVN4430: Installation manual Owner's manual Owner's manual Brochure Owner's manual

Contents

Eclipse AVN4430 Owner's Manual Manual pdf 97 page image

95 95A slight difference in operation may be mistaken for a malfunction. Please check the items inthe following table first.If the unit does not work, even after the appropriate remedial action has been taken, pleasecontact your dealer.CAUTIONWhen You Think There Is a MalfunctionIf a problem occurs, for instance when the receiver or PND does not respond to any buttonpresses, or the display does not work correctly, press the [Reset] button using a paper clip orsimilar item.Pressing the [Reset] button will delete all the entries from memory. The settings will return tothose made at the factory prior to shipment.Phenomenon Possible cause ActionThe screen is dark for a briefperiod when the power is turnedon at low temperatures.This is a characteristic of LCDs. This is not a malfunction. Wait fora brief period.The display is distorted for a briefperiod after the power is turnedon.This is a characteristic of LCDbacklighting.This is not a malfunction. Thedisplay will stabilize after a briefperiod.No sound comes out.Volume is poorly adjusted orMUTE is functioning.Turn the VOL rotary knob toadjust the volume, or releaseMUTE.The music is muted when thePND is attached to the main unitand when:● the voice guidance is ON.● talking in the hands-freemode*This is not a malfunction. Themusic can be heard again whenthe voice guidance finishes or thehands-free mode is turned off.Sound comes out of only one side(left or right, front or back).A speaker wire is disconnected. Check the connections of thespeaker wires.Volume is poorly adjusted. Check the balance and faderadjustments.Sound quality does not changeeven after making adjustments.The adjusted audio quality is notincluded in the radio broadcast ordisc.Check by changing the radiostation or disc.A CD/DVD will not go into thedeck.Power is not turned on. Turn the vehicle ignition switch to[ACC] or [ON].A disc is already inserted and youare trying to insert a second disc.Eject the previously inserted CD/DVD and insert the preferred CD/DVD.[Reset] button