How to operate the tuner with an optional XM satellite radio tuner connected (U.S.A./CANADA only)89XVIIOperations during rotary modeTurn to the right:Tunes to higher channels.Turn to the left:Tunes to lower channels.Category selectionThe channel can be selected from amongcategories such as ROCK and DANCE.Consult the XM website for the details of thecategories.The category will switch in the ordershown below each time button ispressed.Up:Advances to the next category.Down:Returns to the previous category.Direct channel selectionThe channel can be selected by inputting thechannel directly.The mode will change to the directchannel selection mode.Right:Advances to the next number.Left:Returns to the previous number.Each time the button is pressed, thechannel number changes in thefollowing order.0 ↔ 1 ↔ 2 ↔ 3 ↔ 4 ↔ 5 ↔ 6 ↔ 7 ↔8 ↔ 9 ↔ 0 ↔ wwwReception starts.Manually setting channels intomemoryThis section covers the storing of stations in thememory of numbered buttons.The tuned channel is now memorizedand set in the button selected. Repeatthe procedure to set additionalmanually tuned channels into memory,in turn, for buttons [1] to [6]. Thesebuttons are called the preset buttons.ATTENTIONIf the vehicle’s battery is disconnected (forrepairs to the vehicle or when removing themain unit), all channels stored in memory willbe lost. In such cases, set the channels intomemory again.1 Turn the [VOL] button to the left orright.1 Press the [SELECT] (Up/Down)button for less than one second.1 Press the [MODE] button for morethan one second.2Press the [SELECT] (Right/Left)button to select the channelnumber.3Press the [SELECT] (Up/Down)button to select the channelnumber to be input.4 Press the [ENTER] button.1Press the [SELECT] (Right/Left)button to tune to the channel to bestored in the memory.2Select any button, from [1] to [6],and press it for more than twoseconds.
