How to operate the Sound Adjustment Mode 179 Parametric equaliser adjustment(PEQ)The parametric equaliser adjusts 7 frequencybands.The mode will change to parametricequaliser adjustment mode.Each time the button is pressed, theselection changes in the followingorder.➔ 1 ➔ 2 ➔ 3 ➔ 4 ➔ 5 ➔ 6 ➔ 7➔ 1wwwWhen the button is turned, thefrequency changes in the followingorder.1: 63Hz↔80Hz↔100Hz2: 125Hz↔160Hz↔200Hz3: 250Hz↔315Hz↔400Hz↔500Hz4: 630Hz↔800Hz↔1kHz↔1.25kHz5: 1.6kHz↔2kHz↔2.5kHz↔3.15kHz6: 4kHz↔5kHz↔6.3kHz↔8kHz7: 10kHz↔12.5kHz↔16kHzThis adjusts the frequency level.[ ] button:Increases level.[ ] button:Decreases level.Each time the button is pressed, theQ curve changes in the followingorder.The preset value is overwritten bythe value set using the above steps.The time alignment and crossoveradjustments will also be stored at thistime.At this time, other adjustments canalso be made in normal mode.1 Turn the [SEL] button to selectPEQ.2 Press the [SEL] button.3 Press the [SEL] button to selectthe band to be adjusted.4 Turn the [SEL] button to selectthe frequency to be adjusted.5 Press the [ ] or [ ] button.6 Press the [6] button to select theQ curve pattern.7 Repeat the operations in stepsto to change the settingsfor each band.8 Hold down a button, [1] to [5], formore than two seconds to preseta value.9 Press the [RTN] button.10 Press the [SOUND] or [RTN]button to exit sound adjustmentmode.NORMAL SHARP SLOW3 6XII
