Eclipse ECL-HYDVR32B User Manual
                                                                                                                                                                                                                                                              | |
Contents
| 
1795 WEB OPERATIONSlightly difference may be found in the interface due to different series.5.1 Network ConnectionBefore web client operation, please check the following items: Network connection is right DVR and PC network setup is right. Please refer to network setup(mainmenu->Setting->Network) Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not.Usually the return TTL value should be less than 255. Current series product supports various browsers such as Safari, fire fox browser,Google browser. Device supports multiple-channel monitor, PTZ control, DVRparameter setup on the Apple PC.5.2 LoginOpen IE and input DVR address in the address column. For example, if your DVR IP is10.10.3.16, then please input http:// 10.10.3.16 in IE address column.System pops up warning information to ask you whether install control or not. Please clickInstall button. See Figure 5-1.Figure 5-1After installation, the interface is shown as below. See Figure 5-2.Please input your user name and password.Default factory name is admin and password is admin.Note: For security reasons, please modify your password after you first login. |
Related manuals for Eclipse ECL-HYDVR32B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine