Eclipse ECL-VIP200 User Manual
                                           | |
Contents
| 
133 Installation DebuggingWarning: Before debugging, the staff shall be familiar with device’s installation, wiringand usage. Before debugging, check wiring for short or open circuit. When staff find each circuit is normal, plug the device to power. After debugging, clear the site.3.1 WEB SetupIf you first use VTO, you may need to operate according to the following steps:Step 1. First, make sure your PC and the VTO are well connected, and follow stepsbelow to login WEB interface.Step 2. In Internet Explorer, input IP address of the VTO, and press Enter. System showsFigure 3- 1.Step 3. Input Username and Password.Step 4. Click on Login.Note:Default IP address of VTO is 192.168.1.110. Default username and password isadmin/admin. After first login, please change your password.Figure 3- 1 |
Related manuals for Eclipse ECL-VIP200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine