Eclipse PE300BU Operator's Manual
                                            | |
Contents
| 
11Connecting the Batteries1. Place the batteries in the machine oriented asshown in diagram.2. Connect the batteries as shown in the batteryconnection diagram.3. DANGER! Incorrect connection of batteries cancause explosion and/or serious injury.4. Double check battery connections.5. Connect the battery pack plug to the machine.Installing the Skirt1. Lift the deck upward about 90 degrees by pulling upon the front of the deck. At this point, the tilt latchwill hold the deck in the pad change position. (Ref.Machine Operation - Installing/Changing BurnishingPad)2. Remove steel skirt from bubble wrap packing and onthe outside of the skirt, loosen the 1/4” hex bolt withjam.3. Slide the skirt onto the burnish head aligning theslots in the skirt with the tabs on the deck. Makesure the 1/4” bolt is at the back of the shroud.4. Tighten the 1/4” bolt until the skirt is snug around thedeck but also floats up and down freely.5. Tighten jam nut and lower deck to burnish position.(Ref. Machine Operation: Installing/ChangingBurnishing Pad) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine