Eclipse TFB030 Manual

Also see for TFB030: Installation guide

Contents

Eclipse TFB030 Manual Manual pdf 4 page image

4 Eclipse TFB, V2, Design Guide 310, 11/14/2014Product DescriptionThe TFB is a nozzle-mixing burner designed for tube firingapplications with multiple fuel capability. The burnerconsists of a housing, rear cover, air and fuel inlet blocks,spark rod, flame rod (if selected), UV scanner adapter (ifselected), gas tube, nozzle and air shroud.Burner design provides:• Adjustable air shroud to maintain correct air velocityfor different sized tube applications and fuels.• Uniform tube temperatures for extending tube life.Heat ExchangerThe TFB can be used with or without an exhaust legrecuperator. An exhaust leg recuperator is a heatexchanger that transfers heat from the exhaust air to thecombustion air. Preheating the combustion air canincrease the fuel efficiency by as much as 20%. The TFBcan handle combustion air temperatures up to 1000°F.The recommended recuperators for the TFB are theEclipse Bayonet (Data 317) and the Bayonet-Ultra (Spec.318).Figure 1.1. TFB BurnerAudienceThis manual has been written for people who are alreadyfamiliar with all aspects of a nozzle-mix burner and its add-on components, also referred to as “the burner system”.These aspects are:• Design• Selection• Use• MaintenanceThe audience is expected to have previous experiencewith this type of equipment.TFB DocumentsDesign Guide No. 310• This documentDatasheet, Series No. 310-1 through 310-3• Available for individual TFB models• Required to complete installationInstallation Guide No. 310• Used with Datasheet to complete installationWorksheet No. 310• Required to provide application information toEclipse EngineeringRelated Documents• EFE 825 (Combustion Engineering Guide)• Eclipse Bulletins and Info Guides: 610, 710, 720,730, 742, 744, 760, 930, I-354PurposeThe purpose of this manual is to make sure that the designof a safe, effective, and trouble free combustion system iscarried out.TFB030-075TFB2001Introduction