Ecobee Smart Thermostat User Manual

Also see for SMART THERMOSTAT: User manual User manual Installation manual Installation manual User manual

Contents

Ecobee Smart Thermostat User Manual Manual pdf 14 page image

List of AlertsBelow is a complete list of alerts. Depending on yourconfiguration, some of these may not apply to your system.Low BatteryFurnace Air FilterVentilator FilterUV LampHumidifier FilterComms faultLow Temp. AlertHigh Temp AlertLow Humidity AlertHigh Humidity AlertHeat NotRespondingCool NotRespondingInput 1Input 2MaintenanceReminderAuxiliary HeatRun TimeAuxiliary OutdoorTemperatureThe battery in your Smart Thermostatwill need to be changed soon.Your furnace filter needs to becleaned/changed.Your ventilator filter needs to becleaned/changed.Your UV lamp needs to be changed.Your humidifier pad needs to becleaned/changed.There is no communication between theSmart Thermostat and the EquipmentInterface module.The temperature in the home is too low.The temperature in the home is too high.The humidity in the home is too low.The Humidity in the home is too high.The system has failed to heat the home.The system has failed to cool the home.Used if this input is programmed togenerate an alert.Used if this input is programmed togenerate an alert.You are due for regular maintenance.Your auxiliary heat source is runningtoo often.Your auxiliary heat source is runningat higher than expected outdoortemperatures.23 Understanding AlertsUSING yOURSMART THERMOSTATThe bright, easy-to-read and easy-to-use touch screenon your Smart Thermostat makes it simple to review andadjust the settings any time you want.Adjusting temperatureYou can easily adjust the temperature without changingthe thermostat’s programming.Once you’ve adjusted the temperature, the sliderchanges to indicate that you are currently holding theset temperature rather than running a program.The Smart Thermostat will hold the new temperaturefor the duration you specified in the Hold Action optionduring the initial setup (see Holding Action page 11) oruntil you press Resume.If your system is set for auto-changeover mode, and youhave selected Auto in the Details System mode, an arrowwill appear on the temperature scale, in addition to themagnifier. This will allow you to adjust both the heatingand cooling set temperatures.There is a minimum difference allowed between the heatset temperature and the cool set temperature. If youchange the temperatures such that this minimum is notmaintained, the system will automatically adjust the otherset temperature to compensate. You can configure theAuto change-over mode and the minimum temperaturedifference is configurable in the installer settings.Viewing DetailsThe Details screen lists various temperature and equipmentdetails associated with your Smart Thermostat:Current TemperatureThe temperature in the room where the Smart Thermostatis installed.To adjust the temperature:Use your finger topress and move the settemperature slider leftor right to select thetemperature you wantin the magnifier.Tapping either end ofthe temperature scalewill move the sliderby 1°F (0.5° C).Using your Smart Thermostat 24To access your Details:From the Homescreen, press Details.