EN 33SAFETY INFORMATIONFor your safety and correct operation of the appliance, read this manualcarefully before installation and use. Always keep these instructionswith the appliance even if you move or sell it. Users must fully know theoperation and safety features of the appliance.The wire connection has to be done by specialized technician. The manufacturer will not be held liable for any damages resulting fromincorrect or improper installation. The minimum safety distance between the cooker top and the extractorhood is 650 mm (some models can be installed at a lower height,please refer to the paragraphs on working dimensions and installation). If the instructions for installation for the gas hob specify a greaterdistance, this must be respected. Check that the mains voltage corresponds to that indicated on therating plate fixed to the inside of the hood. Means for disconnection must be incorporated in the fixed wiring inaccordance with the wiring rules. For Class I appliances, check that the domestic power supplyguarantees adequate earthing. Connect the extractor to the exhaust flue through a pipe of minimumdiameter 120 mm. The route of the flue must be as short as possible. Regulations concerning the discharge of air have to be fulfilled. Do not connect the extractor hood to exhaust ducts carryingcombustion fumes (boilers, fireplaces, etc.).