FAIR S7 Maintenance And Use Manual
                            | |
Pellets Stove8888Examples of correct installationExamples of correct installationExamples of correct installationExamples of correct installation1) Installation with hole on the roof for the passage of the pipe using an adequate mineral insulator (rockwool, ceramic fibre with a density bigger than 80 kg/m 3). The hole diameter varies from 300 mm, if the hole isin contact with flammable materials (wood etc.), to 200 mm if in contact with non-flammable materials(cement, bricks, etc.). This rule is valid also for holes on the wall.2) Old chimney flue, ducted with an external door for the cleaning.3) External chimney flue made of insulated stainless steel pipes with double wall, diameter 8-10 cm, wellfixed on the wall.4) Ducts system of T pipe fittings for easy cleaning without the disassemble of the pipes.Pic. 9• FUELFUELFUELFUELCombustible materialCombustible materialCombustible materialCombustible materialDo not use inflammable liquids. Pellets are the only combustible material you can use. You can find differentkind of pellets with different characteristics and quality on sale. We recommend to use pellets of good qualityas that has great influence on the heating capacity and on the residuals of ash. Pellets characteristics are:diameter of 6-7 mm, maximum length 30 mm, they must be well pressed and little friable, without anyresiduals of glue, resin or additive. Not adequate pellets can cause bad combustion, frequent blockage of thebrazier, obstruction of waste pipes, increase of consumption and decrease of heating power, dirtiness of theglass, increase of ash quantity or unburned granules. Any wet pellets causes bad combustion and badfunctioning of the appliance, therefore make sure you store the pellets in dry rooms but at least 1 meter farfrom the stove or any other heating appliance. We suggest you to try different pellets on sale and thenchoose those with the best performance. The use of low quality pellets can damage the stove making theguarantee not granted and the manufacturer not responsible for the damage. |
manualsdatabase
Your AI-powered manual search engine