FALMEC Bellaria Operation Manual
Also see for Bellaria: Instruction booklet
                                                | |
Contents | 
10tecHnical SaFetyBefore installing the hood, check the integrity and function ofeach part. Should anomalies be noted, do not proceed withinstallation and contact the Dealer.Do NOT install the device if an aesthetic defect has been detected; putit back into its original package and contact the Dealer. No claim canbe made for aesthetic defects once it has been installed.Do not install the device outdoors and do not expose it to weathering(rain, wind, etc.).Do not modify the electrical, mechanical and functional structure ofthe equipment.DO NOT use BELLARIA if the power supply cable or other componentsare damaged: disconnect the device from the electrical power supplyand contact the Dealer or an authorised Servicing Department for re-pairs.Do not personally try to carry out repairs or replacements. Interven-tions carried out by incompetent and unauthorised persons can causedamage, even serious, to things and/or persons not covered by themanufacturer's warranty.electrical SaFetyThe electrical system to which the device is connected mustcomply with all standards and must be earthed in compliancewith the safety regulations in the Country of use; it must alsocomply with European standards on electromagnetic compatibility.the electrical system is compliant with law and can withstand the loadof the device (refer to the technical speciications on the identiicationnameplate mounted on the device);Any changes to the electrical system must be carried out by a qualiiedelectrician.uSer warningSThese warnings have been drawn up for your personal safetyand those of others. You are kindly asked to read the book-let carefully in its entirety before using the equipment or carrying outcleaning operations.The manufacturer declines all responsibility for any damage causeddirectly, or indirectly, to persons, things and pets as a consequence offailing to comply with the safety warnings indicated in this booklet.It is imperative that this instructions booklet is kept together with theequipment for any future consultation.If the device is sold or transferred to another person, make sure that themanual is also supplied so that the new user can be made aware of thedevice's operation and relative warnings.Insist on original spare parts.intended uSeThe BELLARIA home air puriier is intended exclusively for treating airin 40-50m3 volume environments.Any use other than this is improper, it can cause damage to persons,properties and pets and exempts the manufacturer from any liability.The equipment can be used by children above the age of 8 and by per-sons with reduced physical, sensory and mental abilities, or with no ex-perience or knowledge, as long as they do so under supervision or afterhaving received relative instructions regarding safe use of the equip-ment and understanding of the dangers connected to it. Children are notto play with the equipment. Cleaning and maintenance by the user mustnot be carried out by children without supervision.inStallationBefore installing the device, read the "Safety instructionsand warnings" chapter carefully.tecHnical FeatureSThe technical speciications are shown on a label mounted on the device:100÷230V 50/60Hz 30W.poSitioningThe device is free-standing and can be placed anywhere within thehome, in typical household temperature and humidity conditions.T= 10÷35°CH= 40÷80%Avoid sources of heat and high humidity environments.electrical connectionThe product should be used only with the power supply unitprovided.Before connecting the equipment to the electrical mains power supply,check that:the mains voltage corresponds to that speciied on the label on the pow-er supply unit providedTo avoid overloading, do not share the same power outlet with too manyappliances.once connected, the plug and cable do not come into contact with hotparts having temperatures that exceed 70°C;Do not place any connecting cable where it can be stepped on or discon-nected.Do not place heavy objects on it, to prevent its ends from being dam-aged.The socket used for connection is within reach with the device installed.Grasp the plug and not the cables for disconnection from the socket.The Manufacturer declines all responsibility for failure to comply with thesafety regulations.UK Safety instructions,warnings and installation Bellaria |
Related manuals for FALMEC Bellaria
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine