GB12KJ 60750313 - KJ60 – rev 22 - ( 04-2019 )KJ 60EACKJ 60EABCMDNF G H IL29580270Ø 35Ø 109Ø 24KJ 60EACTOOL IDENTIFICATIONThe riveting tool KJ 60 is identified from a marking that showscompany name and address of manufacturer, designation ofthe tool, CE. Always refer to the information on the riveting toolwhen requesting technical service.TECHNICAL DATA• Working pressure ......................................................6 BAR• Min. int. diam. of the compressed airfeeding hose ....................................... min. diam = 8 mm• Air consumption per cycle ............................................9 Nl• Max power .................................................6 BAR -13656 N• Weight .................................................................. 2,200 Kg• Working temperature ...........................................-5°/+50°C• Root mean square in total acceleration frequency (Ac)to which the arms are subjected. .........................< 2.5 m/s2• A-weighted emission sound pressure level ............. 70 dBA• Peak C-weighted instantaneous sound pressure <130 dBC• A-weighted sound power ........................................ 82 dBAMAIN COMPONENTSA) .................................................................Threaded tie rodB) ...................................................................................HeadC) ..................................................... Ring nut clamping headD) ...............................................Tensile strength pushbuttonE) .....................................................Unscrewing pushbuttonF) ................................ Insertion Pin Hole Dechucking clutchG) ..................................................Regulation stroke ring nutH) .......................................................... Balancer connectionI) .................................................................. Pneumatic motorL) .......................................................................Oil tank plugM) .............................................. Compressed air connectionN) ............................................................... Protection bottomCompany name andaddressDesignation of the toolSerial numberAIR FEEDThe air feed must be free from foreign bodies and humidity inorder to protect the tool from premature wear and tearof the components in movement, therefore we suggest to usea lubrificator group for compressed air.GENERAL NOTES AND USEThe tool can be employed only for blind rivet nuts with threadof M3 ÷ M8 diameter ( Inox M8 excluded ).The KJ 60 oil pneumatic system assures more power thanthe pneumatic system used for other models. That meansa reduction in the problems due to the wear and tear of thecomponents, therefore, there will be an increase in reliability.The technicai solutions adopted reduce the dimensions and theweight of the tooi which, for these reasons, make it very handy.The possibilities of leakage from the oil-dynamic system, areeliminated by some sealed gaskets, which solve this problem.