RESTRICTED USE ONLY Fargo Electronics, Inc.HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4) 2-1Section 2: SpecificationsThe purpose of this section is to provide the User with specific information on the RegulatoryCompliances, Agency Listings, Technical Specifications and Functional Specifications for theHDP5000 and HDP5000-LC Printers.Safety Messages (review carefully)Symbol Critical Instructions for Safety purposesDanger: Failure to follow these installation guidelines can result in deathor serious injury.Information that raises potential safety issues is indicated by awarning symbol (as shown to the left).• To prevent personal injury, refer to the following safetymessages before performing an operation preceded by thissymbol.• To prevent personal injury, always remove the power cord priorto performing repair procedures, unless otherwise specified.Caution: This device is electrostatically sensitive. It may be damaged ifexposed to static electricity discharges.Information that raises potential electrostatic safety issues is indicatedby a warning symbol (as shown to the left).• To prevent equipment or media damage, refer to the followingsafety messages before performing an operation preceded by thissymbol.• To prevent equipment or media damage, observe allestablished Electrostatic Discharge (ESD) procedures whilehandling cables in or near the Circuit Board and PrintheadAssemblies.• To prevent equipment or media damage, always wear anappropriate personal grounding device (e.g., a high quality wriststrap grounded to avoid potential damage).• To prevent equipment or media damage, always remove theRibbon and Cards from the Printer before making any repairs,unless otherwise specified.• To prevent equipment or media damage, take jewelry off offingers and hands, as well as thoroughly clean hands to removeoil and debris before working on the Printer.
