69Connecting PLC to HMIWithin the Link configuration window in FvDesigner:Under Interface Type select EthernetUnder Manufacturer select Mitsubishi Electric CorporationUnder Product Series select one of the Mitsubishi FX5U-ENET options. The last part ofthe series name (BINARY or ASCII) should be consistent with the Connection Data Codeset in the Ethernet Port for the PLC.Enter the IP Address that was written into the PLC.Enter 1025 for the Port.QSeries-Serial Communication(Link Port)2.2.8.1 Communication SettingItem Default Setting RemarkSignal Level RS232/RS422/RS485 QJ71C24N ModuleBaud Rate 115200Data Length 7Stop Bit 1Parity OddPLC Station No. 0
