FAW Jilin Automobile Xenia S80 Handbook
                                                                                                                                                                                                                                                                      | |
Contents
| 
14-5Engine coolantDanger Remove any splashed oil. Oil left over on hotcomponents might cause fire hazards. Wash your hands thoroughly. Long-term exposure to used engine oil mightlead to skin carcinoma. Never discharge the waste oil onto the groundor into sewage drains. Take care to dispose thewaste oil at places equipped with suitabletreatment facility. It is advisable to replace oil atthe local special service store. Install the oil filler cap securely. Otherwise, oilconsumption might increase, and engine oilsplashed onto component might cause firehazards.DangerBe careful not to scald yourself when you removethe radiator filler cap or drain plug.○ Precautions for usage1. Do use coolant conforming to Q/CAM-192-2007standard.2. Use coolant all the year around.3. It is prohibited to palm the coolant with coolantsof other brands.4. Verify the validity period of products.5. Before winter begins, verify whether or not theice point of coolant you used is applicable to theminimum temperature of regions where yourautomobile may operate.○ The user shall select the types of coolant listedin the table below as per the temperatureconditions of the regions where the automobilemay operate:Type Part code IcepointColor and characteristicsYQ-2004X 52333404 0262- 20℃ Deep blue, transparent,free of precipitateYQ-2004D 52333404 0278-35℃ Deep blue, transparent,free of precipitateYQ-2004J 52333404 0322-45℃ Orange red, transparent,free of precipitateYQ-2002 52333404 0323―8℃ Light green, transparent,free of precipitateIf the coolant level drops considerably, contact thelocal special service store for inspection of thecooling system.Inspection of engine coolant levelWhen engine gets cool, check the coolant levelinside the reservoir.Check check whether or not the level is locatedbetween “FULL” and “LOW” lines.If the coolant level drops due to spontaneousevaporation, add soft water only. If massive coolantis lost, add long-acting coolant.If the reservoir is empty, add coolant into theradiator and reservoir.Wipe off the spilled coolant, and securely install thereservoir cap and radiator filler cap. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine