FCI CHG-120 Instruction Manual
                        | |
Contents
| 
Installing the Charger Connecting Batteries to the Charger6 CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9000-0572Connecting Batteries to the ChargerOverview you can connect 25 AH –120 AH batteries to the charger. This section providesillustrations and instructions for connecting two batteries or for connecting four batteries.Connecting Two Batteries Figure 5 shows how to connect two 25 AH batteries to thecharger:Figure 5 Connecting 25 AH BatteriesTable 3 contains instructions for connecting batteries to the charger:Warning: Do notconnect the BatteryInterconnect Cableat this time.Refer to “Starting theCharger” on page 15.! Power SupplyCHG-120TB2TB1Step Action1 Remove all power sources to the charger.2 Connect the battery negative cable to the TB2 terminal (on the chargerlabeled “Battery –” as shown in Figure 5.3 Connect the battery positive cable to the TB2 terminal (on the charger)labeled “Battery +” as shown in Figure 5.4 Proceed to the section “Connecting the Charger.” Do not connect the BatteryInterconnect Cable at this time—refer to “Starting the Charger” on page 15.Table 3 Connecting 25 AH Batteries |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine