Faber PURE BF80S Installation Manual And User's Manual

Also see for BF80S: User manual

Faber PURE BF80S Installation Manual And User's Manual Manual pdf 39 page image

UK/IRL> > > > 399.1.4 Gas control block1. Unscrew the pilot system from the support;2. Unscrew and remove the pilot system from the burner plate;3. Disconnect the ignition/spark cabel (bougiekabel);4. Disconnect the thermocouple from the pilot system;5. Disconnect the gas connection from the pilot system. Mind theinjector: it is unattached;6. The polit system can now be removed;7. To assemble the pilot system again, follow the steps above in reversedorder.9.2 Propane conversionFor conversion from propane to natural gas, you have to order a completenew propane burner unit. Contact your supplier and give the serialnumber from the data plate when you order.9.3 Combustion testsA BS7967 combustion analysis check should be carried out using ananalyser to BS7927 positioned in the flue outlet.A Ratio of CO/CO2 should be less than 0.01 within 30 minutes. (100 ppmCO per 1% CO2).A reading of CO in the room centre should give a rise of less than 9ppmover ambient, peak reading.A. GovernorB. Adjusting screw pilotflameC. Inlet pressure test pointD. Burner pressure testpoint