Faber TIMRA Installation Manual And User Manual

Also see for TIMRA: User manual Installation guide

Contents

Faber TIMRA Installation Manual And User Manual Manual pdf 12 page image

UK/IRLUK/IRL 235.3 Installation remote control (continuing)Setting the right transmission codeThe receiver has to learn the code from the transmitter, which is already set at thefactory. However the code disappears if the receiver is disconnected from the mainsfor a longer period.1. Push the "mod" button on the receiver and hold it for 3 seconds.2. The green control lamp will light up and stay on. Repeat this step if not.3. Push a button on the remote control. The control lamp on the receiver should nowgo out.4. Again push a button on the remote control. The lamp starts flashing and will switchoff eventually.5. The receiver now recognizes the remote control. The remote control now functions.6. Check if you can hear a sound and the motor runs when you push a button on theremote control.UK/IRLUK/IRL 246. COMMISSIONING (functional checks)6.1. Check pilot ignition1. Push in and turn the control knob (A) anticlockwise to the setting (small flame).You will hear a tick meaning there is ignition. Hold the knob in and wait for a fewseconds while the air is purged.2. Bring the knob back in the start position and turn the knob several times to theposition. Check that the pilot has lit.3. Continue to hold in the control knob for a further ten seconds to ensure that thepilot flame is stable.4. Release the knob. The pilot should remain alight.6.2 Functional burner check1. Turn knob (B) to max. clockwise.2. Turn the knob (A) more anticlockwise to the position (large flame). Now it ispossible to light the main burner.3. Turn knob B anticlockwise to max. The main burner should light.