FabiaTech FP8100 Series User Manual

Also see for FP8100 Series: Users Quick Reference

Contents

FabiaTech FP8100 Series User Manual Manual pdf 28 page image

FabiaTech Corporation22Standard CMOS SetupThis section describes basic system hardware configuration, system clock setupand error handling. If the CPU board is already installed in a working system, youwill not need to select this option anymore.¾ Date & Time SetupHighlight the field and then press the [Page Up] /[Page Down] or [+]/[-]keys to set the current date. Follow the month, day and year format.Highlight the field and then press the [Page Up] /[Page Down] or [+]/[-]keys to set the current date. Follow the hour, minute and second format.The user can bypass the date and time prompts by creating an AUTOEXEC.BAT file.For information on how to create this file, please refer to the MS-DOS manual.¾ Hard Disk SetupThe BIOS supports various types for user settings, The BIOS supports , Slave>, so the user can install up to two hard disks. For the master and slavejumpers, please refer to the hard disk’s installation descriptions and the hard diskjumper settings.You can select under the and fields. This will enable autodetection of your IDE drives during boot up. This will allow you to change your harddrives (with the power off) and then power on without having to reconfigure yourhard drive type. If you use older hard disk drives, which do not support this feature,then you must configure the hard disk drive in the standard method as describedabove by the option.