Fagor QR-1 Installation, Use And Maintenance Manual

Contents

Fagor QR-1 Installation, Use And Maintenance Manual Manual pdf 9 page image

www.Fagorcommercial.com PAGE 9REACH-INS OPERATIONAL SERVICE MANUAL / Rev.JUN. 20153.5 LEVELINGSet unit in its final location. A level cabinet looks better and will perform better. Effective condensateremoval and door operation will be effected by leveling. Machine must be leveled front to back andside to side with a level tool. Castors k i t w i l l include shims for leveling. Insert the shim between thecastor and the frame rail. (See installation of castors). Lock front castors so cabinet does not move.Ensure drain hose is inside drain pan.3.6 ELECTRICAL CONNECTIONSRefer to the amperage data in this manual, or on data plate, and your local code or the NationalElectrical Code to be sure unit is connected to the proper power source. Verify correct incomingvoltage according to the Data Plate information.Do not, under any circumstances, cut or remove the ground prong from the power cord. Fagor unitsmust be properly grounded.NEVER USE AN EXTENSION CORD! Fagor will not warranty any unit that has beenconnected to an extension cord.Fagor equipment must be grounded and connected in accordance with NEC Article 422Appliances.DANGER:Power must be turned off and disconnected from the power source whenever performingmaintenance, repair or cleaning the condensing unit.If machine is still running when power is off, disconnect power at the circuit breaker beforeunplugging the machine.WARNING:Machine and compressor warranties are void if failure is due to improper electrical