HD Hybrid 5 in 1 DVR Manual V1.1 http://www.faittoo.com sevice@faittoo.com274.12.3 PTZ controlOperation Procedure:1) Right-click the shortcut menu bar " PTZ Control" to enter its control interface , as shown:Figure 4-242) Adjustable PTZ direction , click the " Up / Down / Left / Right " arrow keys3) Click the " zoom/focus/iris " to adjust image scaling/focus/ image brightness,Of course, the premise isPTZ camera can support Zoom, Focus and Iris4)UTC Menu:When you connect PTC camera through the UTC coaxial control, then you can click UTCMENU to set the camera's menuIllustration● If you want to control one channel’s PTZ, please double-click into the channel, right mouse clickto select "PTZ Control". Click " PTZ Control" is defaulted to enter the first channel.For example, you want to control the third channel PTZ, then please double click on the third channel,let it full screen display, then right click the mouse to choose “PTZ Control”.4.12.4 To call a presetOperation Procedure:1)Right- click into the "System Setup" - > "Channel Setup" - > " PTZ Setup" :Figure 4-252)Click " ? " to enter the following figure:Figure 4-263) Click " Up /Down / Left / Right " arrow keys to adjust the PTZ preset position, right mouseclick to back to the original interface after adjustment;4) Click "Go to", the position of the head to start moving just set.