Falcon 900 Deluxe Induction G5 User's Manual & Installation Instructions

Falcon 900 Deluxe Induction G5 User's Manual & Installation Instructions Manual pdf 18 page image

141 2 3Control Panel and Oven DoorsThe control panel and control knobs should only be cleanedwith a soft cloth wrung out in clean hot soapy water – buttake care that no surplus water seeps into the appliance. Wipewith a clean dampened cloth then polish with a dry cloth.The oven doors should only be cleaned with a soft clothwrung out in clean hot soapy water.Ovens‘Cook & Clean’ PanelsThe ovens have side ‘Cook & Clean’ panels which have beencoated with a special enamel that partly cleans itself. Thisdoes not stop all marks on the lining, but helps to reduce theamount of manual cleaning needed.These panels work better above 200 °C. If you do most of yourcooking below this temperature, occasionally remove thepanels and wipe with a lint free cloth and hot soapy water.The panels should then be dried and replaced and the ovenheated at 200 °C for about one hour. This will ensure that thepanels are working effectively.nn DO NOT use steel wool (or any other materials thatwill scratch the surface).nn DO NOT use oven cleaning pads.The Oven Shelf SupportsThe shelf supports on the oven sides can be removed forcleaning.Removing the Oven Shelf SupportsRemove the oven shelves. Pull the top of the shelf support upand away from the oven side and then lift the support awayfrom the locating bracket at the bottom of the oven side(Fig.5-6).Refitting the Oven Shelf SupportsTo refit the side support. Locate the tag at the bottom of thesupport into the slot in the locating bracket in the oven side(Fig.5-7). Now locate the tops of the side arms in the holes atthe top and gently push down.The Tall OvenTo clean the oven sides, slide out the shelves, unhook thesupports from the oven sides and lift out (Fig.5-8).Fig.5-6Fig.5-7ArtNo.320-0022 Tall oven side supportFig.5-8