Falcon Professional + FX User Manual

Falcon Professional + FX User Manual Manual pdf 26 page image

INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.24ArtNo.280-0032 - Assembling the Anti-tip bracket�� ArtNo.070-0006 - Anti-tip mounted to wallArtNo.280-0033 - Anti-Tip fixed to floorArtNo.070-0001 - Fitting the restaining chainFig.7-7Fig.7-10Fig.7-9Fig.7-11ArtNo.011-0020 - Positioning anti-tip bracket��Fig.7-8Stability Bracket and Chain A stability bracket and chain should be fitted whenthe cooker is connected to a flexible gas supply.Unless properly installed, the cooker could be tipped byleaning on the door. Injury might result from spilled hotliquids or from the cooker itself.IMPORTANT: The cooker must be set to the correct heightand levelled before the stability bracket is installed.Floor AttachmentFit the bracket base (1) and bracket extension (2) togetherand secure using the screws (3) supplied (Fig.7-7).Dimension ‘A’ should be set to give a clearance of about 6 mmabove the centre channel of the cooker base (Fig.7-8).The assembled bracket should be firmly secured to the floor(Fig.7-9) to give a minimum engagement of 50 mm in thecentre channel of the cooker base.Wall AttachmentWhen floor attachment is impracticable and provided thatthe stability bracket base can be securely fixed to a solid wallor wall stud (Fig.7-10). Discard the bracket extension (2). For both floor and wall attachment it is essential touse the appropriate fixing screws and to ensure thatthe stability bracket is firmly attached.Fitting the Restraining ChainThe restraining chain MUST be fitted.The length of chain between the appliance and the wall fixingshould prevent strain on the gas and electricity connections,but still allow access to unhook the chain when the cooker ispull forward.Fix the supplied hook securely to the wall.Measure the length of chain required. Use the hexagon-headed screw, washers and bolt supplied in the restrainingchain kit to fix the chain to one of the holes at the top of theflue trim bracket (Fig.7-11).Hook the other end of the chain to the wall fixing.