Falcon Professional+ FX 90 Induction G5 User's Manual & Installation Instructions

Also see for Professional+ FX 90 Induction G5: User's guide & installation instructions

Falcon Professional+ FX 90 Induction G5 User's Manual & Installation Instructions Manual pdf 23 page image

INSTALLATIONCheck the appliance is electrically safe when you have finished.19Dear InstallerBefore you start your installation, please complete the detailsbelow, so that, if your customer has a problem relating toyour installation, they will be able to contact you easily.ArtNo.050-0011 - Installer information tableInstaller’s NameAppliance Serial NumberInstaller’s Telephone NumberInstaller’s CompanySafety Requirements and RegulationsYou must be aware of the following safety requirements &regulations.nn This cooker must be installed in accordance withthe relevant instructions in this booklet, with therelevant national and local regulations, and with thelocal electricity supply companies’ requirements.nn The appliance must be installed in accordance withthe regulations in force and only in a well-ventilatedspace.nn Read the instructions before installing or using thisappliance.Provision of VentilationThis appliance is not connected to a combustion productsevacuation device. Therefore, particular attention must begiven to the relevant requirements regarding ventilation.All rooms require a window that can be opened, orequivalent, while some rooms require a permanent vent inaddition to the window.Location of CookerThe cooker may be installed in a kitchen/kitchen diner butNOT in a room containing a bath or shower.This appliance is designed for domestic cooking only. Use forany other purpose could invalidate any warranty or liabilityclaim.7. InstallationYou will need the following equipment to complete thecooker installation satisfactorily:• Stability bracket: If the cooker is to be supplied with gasthrough a flexible hose, a stability bracket or chain mustbe fitted.These are not supplied with the cooker but areavailable at most builders’ merchants.• Multimeter (for electrical checks).• Allen keys (provided in pack).You will also need the following tools:1. Electric drill2. Masonry drill bit (only required if fitting the cooker on astone or concrete floor)3. Wall plugs (only required if fitting the cooker on a stoneor concrete floor)4. Steel tape measure5. Cross head screwdriver6. Flat head screwdriver7. 4 mm & 3 mm Allen keys8. Spirit level9. Pencil10. Adjustable spanner11. Screws for fitting stability bracket12. 13 mm spanner or socket wrenchChecking the parts:Full capacity shelf Grill pan tray supportArtNo.326-0004 - Cradle shelf2 grill pans and trivets 2 Energy saving shelvesArtNo.331-0008 - 90SCgrill pan & trivet ArtNo.326-0002 - Energy saving shelfDivider PlinthArtNo.281-0028 - Albertine dividerArtNo.350-0008 - 90 SC plinth