Falcon Professional+FX User's Manual & Installation Instructions

Falcon Professional+FX User's Manual & Installation Instructions Manual pdf 12 page image

8Operating the OvenThe multifunction oven has two controls: a function selectorand a temperature setting knob (Fig. 2.17).Turn the function selector control to a cooking function. Fig.2.18 shows the control set for convectional oven cooking.Turn the oven temperature knob to the temperature youneed. The oven heating light will glow until the oven hasreached the temperature you selected. It will then cycle onand off during cooking as the oven maintains the selectedtemperature (Fig. 2.19).The ClockThe clock must be set to the time of day before the ovenwill work.1. Once the cooker is connected and switched on, thedisplay will start to flash.2. To set the time, turn and hold the Timer (A) knob tothe Clock (C) setting and at the same time turn theAdjusting (B) knob either clockwise or counter-clockwise(Fig. 2.20).3. Once you have set the time release the Timer (A) knob.Setting the Minute MinderA Minute Minder (E) is a feature that can be set for a numberof minutes and sounds an alarm once the specified amountof time has elapsed.1. Turn the Timer (A) knob to the Minute Minder (E)setting (Fig. 2.21).2. Turn the Adjusting (B) knob to set the amount of timerequired. e.g. 20 seconds (Fig. 2.22).3. Turn the Timer (A) knob to the Manual (D) setting tosee the current time and the ‘Bell’ symbol on the display(Fig. 2.23).Cancel the Timer AlarmOnce the specified time has elapsed it will emit an alarm.There are two ways to cancel the alarm:1. Turn the Adjusting (B) knob counter-clockwise orclockwise (Fig. 2.24).2. Turn either the Timer (A) knob to the Clock (C) or to theMinute Minder (E) setting. Return to Manual (D) fornormal cooking mode (Fig. 2.24).NOTEIf the alarm is not manually switched off it will stop afterapproximately 2 minutes.• The ‘cook period’, which is the length of time youwant the oven to cook for.• The ‘stop time’, which is the time of day youwant the oven to stop cooking.ArtNo.270-0027Proplus MF oven selectorcontrolOFFArtNo.300-0005 2BCminute minder settingEA BArtNo.270-0026Proplus MF oven controls (2)ArtNo.270-0028Proplus MF temp controlindicator light1401001802200ArtNo.300-0006 2BCminute minder setting 2A BTemperature selector Function selectorFig. 2.17Fig. 2.18 Fig. 2.19ArtNo.300-0005 2BCminute minder settingA BCArtNo.301-0007 2BCStopping the oven 1DA BECA – Timer knob, B – Adjusting knobFig. 2.20Fig. 2.21 Fig. 2.22ArtNo.300-0006 2BCminute minder setting 2DECA BFig. 2.23Fig. 2.24