Falcon RACKMOUNT UPS PLUS FN3KRM-2 Owner's Operating Manual

Falcon RACKMOUNT UPS PLUS FN3KRM-2 Owner's Operating Manual Manual pdf 22 page image

5.4 LCD Display OverviewLCD Display5.5 LCD Icon Descriptions1. Bypass input is out of tolerance, UPS failed to transfer to bypass, or bypass input is out oftolerance when the UPS is in Economy/Green Mode.2. Utility loss or the utility input is out of tolerance.3. UPS lost inverter output and transferred to bypass.4. Battery voltage is out of tolerance, or defective batteries.5. The UPS output is overloaded.6. The UPS is presently in maintenance mode.7. MIMIC Display showing Line, UPS, Battery and Load. When referenced in conjunction with arrows8, 9 and 11, it defines the operational state of the UPS. They also indicate the source of theinput/output/battery parameter readings displayed on the Measurement Display (12).8, 9 & 11. MIMIC display and Measurement location indicators.10. Battery and Low Battery Icons. The battery icon is displayed as part of the MIMIC display.In the event of a utility loss that depletes that battery charge, the Low Battery icon is displayeduntil the batteries have recharged to a reasonable level. In the event of a complete battery discharge,the low battery icon will be displayed along with an audible alarm. When the batteries have rechargedto a reasonable level, the normal battery icon will be displayed.12. Measurement Display. The Measurement display is used to show the input/output/battery readings,program mode settings, status and error codes.5.6 Status and Error Code DescriptionsOFF or BPS-- Displayed when the UPS is turned off with the “Off” button, EPO or remote shutdown.EPO -- When an optional EPO communications board is installed, EPO is displayed alternately withthe OFF or BPS message, after an EPO signal has been applied to the EPO interfaceconnector. After an EPO condition, the UPS input circuit breaker must be turned off and the“Off” button must be depressed twice for 5 seconds to reset the UPS prior to turning the UPSand Bypass input circuit breakers back on.22Shown in Test Mode