-9-Getting StartedCharging the BatteryIt’s recommended to have the battery fully charged before using yourwireless barcode scanner. You can charge the battery via the suppliedrecharge/communication cradle.Charge the battery via USB Interface of Computer1. Turn on the computer.2. Connect the cradle to the USB port on the computer.The Communication Status Indicator flashes RED and ready for batteryrecharge.3. Install the barcode scanner to the recharge/communication cradle.The LED indicator of the scanner flashes GREEN to indicate the batteryis recharging automatically.4. As the battery is fully charged, the LED indicator lit GREEN steadily toindicate the battery charge is fully charged.5. Remove the barcode scanner from the cradle.The barcode scanner is ready to use.To Host PCRecharge/CommunicationCradle