Fantom FM740 Instruction Manual

Contents

Fantom FM740 Instruction Manual Manual pdf 8 page image

Install the wand to the hose.To achieve maximum reach with the attachments,attach the crevice tool to the end of the wand.Securely and firmly connect the wand to the hose while twisting the wand, as shown in theillustration below.The upholstery tool & dusting brush can be attached directly to the wand, hose or the end of thecrevice tool. Refer to the illustration for the correct way to position the upholstery tool &dusting brush.The end of the wand which has the marking of should be connected to the hose.USING THE ATTACHMENTSCaution: When using the attachments during cleaning, set the vacuumcleaner to the upright position.Disconnect the hose from the vacuumcleaner.Pull the hose gently in the direction ofthe arrow to disconnect it.Upholstery tool & Dusting brushTo detach the dusting brush from the upholstery tool: Press thetabs on the brush downward to remove it.To reattach the dusting brush to the upholstery tool: Insertthe front of the upholstery tool under the hook on the front of thedusting brush. Press down on the back of the upholstery tool tosnap it into place under the dusting brush tabs.14Tabs7Hose2 Hook the hose holder onto theholder mount.Caution:Before using the attachments,please make sure the hose ishooked on the holder mount.Remove the wands from thevacuum cleaner.Two wands are contained together.Pull out the second wand as shown.Caution:3When removing the attachments,pullthem in the directions shown in theillustration.Pulling them in the wrongdirection or pulling them forcefully maycause damage to the attachment ribs.HolderMountHoseHolderCreviceToolWands12SecondWandHoseWandsUpholsteryToolCrevice ToolCrevice ToolDusting BrushCrevice ToolWandHose