TROUBLESHOOTINGIf there is a problem with the vacuum cleaner, carry out the following checksto find the cause. If the problem still persists after the checks have been made,do not use the vacuum cleaner to prevent the possibility of an accident occurring.Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from thewall outlet, and contact FANTOM Customer Service at 1-800-275-9251.Problem Cause RemedyThe motor does not operatewhen the ON/OFF switch isset to the "ON" position.Suction force is weak.The agitator does notoperate.The power cord plug is notsecurely inserted into thewall outlet.The flat belt is worn orbroken.Insert the power cord plugsecurely into the walloutlet.(refer to page 5 )Replace the flat belt.(refer to page 12 )16The dust compartment is full.The suction hose is blocked.The filters are dirty.The nozzle head is blocked.Empty the dust compartment.(refer to page 9)Remove the blockage.(refer to page 11)Clean the filters.(refer to page 10)Remove the blockage.(refer to page 11)The nozzle air inlet pipe isblocked. Remove the blockage.(refer to page 11)Or visit our website at www.fantom.comTO ORDER REPLACEMENT FILTERS CALL 1-800-275-9251