HolderMountHoseHolderReleaseButton CWandCrevice ToolDusterAttachment ClampCaution: When using one of the attachments during cleaning,set the vacuumcleaner to the upright position.123USING THE ATTACHMENTSPress the release button C todisconnect the handle from thevacuum cleaner.Remove the attachments from thevacuum cleaner.Caution:When removing the attachments, pullthem in the directions shown in theillustration.Pulling them in the wrongdirection or pulling them forcefully maycause damage to the attachment clamp.Attach the attachments as shown below.8Hook the hose holder onto the holder mount.Caution:Before using the attachments, please make surethe hose is hooked on the holder mount.When you have finished using the attachments,replace themin their original positions as shown on page 4. TabsGrooveUpholstery tool & Dusting brushTo detach the dusting brush from the upholstery tool: Press thetabs on the brush downward to remove it.To reattach the dusting brush to the upholstery tool: Insertthe front of the upholstery tool under the hook on the front of thedusting brush. Press down on the back of the upholstery tool tosnap it into place under the dusting brush tabs.Suction Hose AWand Crevice ToolUpholsteryToolDustingBrushSuction Hose BAttach the attachments on the handle orthe suction hose B.HandleCaution: Before using the suction hose B, please make sure the handle isreattached on the body.Duster