Fanvil C56 User Manual

Also see for C56: Quick installation guide Quick installation guide

Fanvil C56 User Manual Manual pdf 35 page image

352). Fixed Length: the phone will intersect the number according to your specified length.3). Time Out: After you stop dialing and waiting time out, system will send the number collected.4). User defined: you can customize digital map rules to make dialing more flexible. It is realized bydefining the prefix of phone number and number length of dialing.In order to keep some users' secondary dialing manner when dialing the external line with PBX, phone canbe added a special rule to realize it. Souser can dial a number as external line prefix and get the secondarydial tone to keep dial the external number. After finishing dialing, phone will send the prefix and externalnumber totally to their server.For example, there is a rule 9,xxxxxxxx in the digital map table. After dialing 9, phone will send thesecondary dial tone, user may keep going dialing. After finished, phone will call the number which startswith 9; actually the number sent out is 9-digit with9.Digital Map ConfigurationField name explanationPress “#” to Send Set Enable/Disable the phone ended with “#” dial.Dial Fixed Length xx toSendSpecify the Fixed Length of phone ending with.Send after xx second Set the timeout of the last dial digit. The call will be sent aftertimeout.Press # to Do BlindTransferEnable Blind Transfer OnHook, when executing Blind TransferEnd with #, press # after inputting the number that you want totransfer, the phone will transfer the current call to the third partyBlind Transfer OnHook Enable Blind Transfer OnHook, when executing Blind Transfer,hang up after inputting the number that you want to transfer, thephone will transfer the current call to the third partyAttend Transfer OnHook Enable Attend Trans OnHook, when executing Attended Transfer,hang up after the third party answers, the phone will transfer thecurrent call to the third partyBelow is user-defined digital map rule:[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas,or a list of digits.* Match any single digit that is dialed.. Match any arbitrary number of digits including none.Tn Indicates an additional time out period before digits are sent of n seconds in length. n ismandatory and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dialplan. If Tn is not specified it is assumed to be T0 by default on all dial plans.