Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain theparameters. The PnP and DHCP and Phone Flash are all deployed, endpointwill go by the following process to try to obtain the server address and otherparameters, when it boots up:DHCP option Auto ProvisionField name explanationAuto UpdateSettingCurrent ConfigVersionShow the current config file’s version. If the versionof the configuration downloaded is higher than theversion of the running configurations, the autoprovision would upgrade, or stop here. If the endpointsconfirm the configuration by Digest method, theendpoints wouldn’t upgrade configuration unless theconfiguration in the server is different with therunning configuration.Common ConfigVersionShow the common config file’s version. If theconfiguration downloaded and the runningconfigurations are the same, the auto provision would