Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Far south networks Com.X1 Getting Started

Also see for Com.X1 PBX: User guideAdministrator's guide

Page 1 preview
Page 2 preview
Page 3 preview
Page 4 preview
Contents
  1. getting started
  2. hardware installation
  3. firmware upgrade
Far south networks Com.X1 Getting Started Manual pdf 2 page image
Hardware Installation1. The Com.X1 server is powered using the 12VDC power adapter included with your unit.Connect the power adapter to the server and to mains supply and turn the server on.2. Connect any Comma iTA units to the second and third LAN ports via crossed-overEthernet cables.3. Connect the Com.X1 server to the LAN switch using the first Ethernet port using and astandard cable.4. Connect FXS ports to telephones, fax machines etc. using standard RJ-11 cables.5. Connect FXO ports to telco lines, PBXs, etc. using standard RJ-11 cables.6. Connect BRI ports to telco NT equipment or PBXs using standard S/T RJ-45 cables.7. Connect PRI port to telco NT equipment or PBXs using standard E1 balanced RJ-45 cable.Accessing the Com.X1 server1. Default access details for the Com.X1 are:user: commapassword: farsouth2. The Com.X1 server GUI can be accessed using the url http://, where is the IPaddressed assigned to the unit via DHCP, or one of the statically configured IPs. Alladministrative tasks elaborated on below can be performed from the GUI. Please refer tothe Administrator's guide for more detail.3. The Com.X1 server can also be accessed via its serial port using a null-modem cablewith the following settings:baud rate: 115200data bits: 8stop bits: 1parity: none4. The Com.X1 server requests its IP address from the LAN / WAN via physical Ethernet port1, (labelled the eth0 interface in the Operating System). This interface can be re-configured with a static IP in /etc/network/interfaces as follows:auto eth0iface eth0 inet staticaddress xxx.xxx.xxx.xxxnetmask 255.255.255.0Note that the Operating System networking will need to be restarted after thisconfiguration change:sudo /etc/init.d/networking restartCopyright © 2008-2010 Far South Networks (Pty) Ltd
/ 4
Related manuals for Far south networks Com.X1 PBX
Far south networks Wanderbox Duo Series Quick Start Manual first page preview
Far south networks Wanderbox Duo Series Quick Start Manual
This manual is suitable for:
Com.X1 PBX
Manuals database logo
manualsdatabase
Your AI-powered manual search engine