Farenheit 7” Wide Touch Screen 1-Din Oversized Fully Motorized TFT Monitor/DVD/AM/FM Built-In TV Tuner Operating Manual

Also see for 8" wide Touch Screen 1-Din Oversized Fully Motorized TFT Monitor/DVD/AM/FM: Operating manual

Farenheit 7” Wide Touch Screen 1-Din Oversized Fully Motorized TFT Monitor/DVD/AM/FM Built-In TV Tuner Operating Manual Manual pdf 19 page image

- 18 -RADIO OPERATIONSTouch the icon “RADIO” to enter the 1st operation page of RADIO Mode:1~6. STORED CHANNELManual Store Radio StationHold on touching the icon, you can store current radio frequency to the storedchannel. For example, the current frequency is 98.5MHZ, by hold on touching theicon 1, you can store the radio station of 98.5MHZ to the channel 1.After manual store radio station, the former stored stations will be instead.In each wave band, the number icons 1 to 6 represent the stored radio stations.To hold on pressing the number buttons 1~6 of remote control performs sameoperation.Recall a Preset StationTouch the icon 1~6 to recall the corresponding stored station in M1~M6 channels.To press the number buttons 1~6 of remote control performs same operation.7. FREQUENCY8. SEEK – / 9. SEEK +Touch the icon to seek the next available channel by increasing / decreasing thetuning frequency.Press any button to stop seeking.Seeking will stop automatically when seek an available channel then play this station.The unit will stop on the beginning frequency if no available station after seeking onecycle.To hold on pressing [>] / [<] buttons of remote control performs same operation.10. BANDTouch the icon to switch the FM/AM wave band as following:FM1 - FM2 - FM3 - AM1- AM2 - FM1To press the [BAND] button of panel or remote control performs same operation.