Farenheit MD-900CM Owner's Manual

Contents

DVD SetupGeneral Setup1. TV Aspect RatioIn the Setup function called TV Display, you set the player to output the video signal at thesame aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B(Letterbox).Normal / PS 4:3 PAN SCANChoose this setting if you want the movie to fill the entire screen.(This might mean that the left and right edges won t be seen)Normal / LB 4:3Choose this setting if you want to see the movie in its original aspect ratio.(The movie might appear with black bars at the top and bottom of the screen.)Wide 16:9 WIDE SCREENChoose this setting if your DVD Player is connected to a widescreen TV.(This opition is available only if the disc has a 16:9 display aspect ratio.)2. Angle ViewingSome DVD discs contain programming which allows youto view a scene from a few different camera angles. Youcan tell when a scene is so recorded when an Angle Markis displayed on the screen. This mark will only appear if youhave enabled the Angle Mark featurein the DVD Setup menu.On: When selected, the screen will be shown withangle mark.Off: When selected, no angle mark is shown onthe screen.3. OSD LanguageUse this option to set the OSD language.When selected, change to set the on-screen displaylanguage.14Angle MarkAngle MarkOSD LangOSD LangScreen SaverScreen SaverOnENGOnSet TV Display ModeSet TV Display ModeGeneral Setup PageGeneral Setup PageNormal/LBWideTV DisplayTV Display PS Normal/PSOSD LangOSD LangScreen SaverScreen SaverENGOnSet Angle MarkSet Angle MarkGeneral Setup PageGeneral Setup PageOffTV DisplayTV Display PSAngle MarkAngle Mark On OnScreen SaverScreen Saver OnSet OSD LanguageSet OSD LanguageGeneral Setup PageGeneral Setup PageTV DisplayTV Display PSAngle MarkAngle Mark OnOSD LangOSD Lang ENGEnglishKoreanFrenchGermanItalianSpanishPortugueseDutchEnglishKoreanFrenchGermanItalianSpanishPortugueseDutchDVD FunctionsSubtitle(SUB-T)This button is used to select the language for the on-screen display system.(This title menu may vary, depending on the particular DVD.)[DVD]OSD1 / 2TitleSlow( )27Used to display the title menu of the loaded DVD disc.This function is only present on discs which support it.[DVD][DVD]/[VCD] CONDITION1 / 41 / 82X slow forward4X slow forward8X slow forwardUse this button to play a disc in slow-forward orslow-reverse. Slow playback can be done at fivedifferent speeds. Pressing this button repeatedlydecreases the speed in steps. Pressing a sixthtime returns playback to the normal speed. 1 / 161 / 21 / 41 / 81 / 16Play16X slow forward2X slow rewind4X slow rewind8X slow rewind16X slow rewindPlay1 / 32 32X slow forward1 / 32 32X slow rewind