Farenheit TI-650B Owner's Manual

Contents

5INSTALLATIONNoteBefore starting installation of the unit, make sure the wiring is connected properly.Use only the parts provided with the unit to ensure proper installation.The use of unauthorized parts may cause malfunction.Install the unit where it does not get in the driver’s way and will not injure the passenger in casethere is a sudden stop, like an emergency stop.INSTALLATION （Figure 1） Insert Half Sleeve into dash-board hole and bend mount tabs outwards to fix it as figure 1. If necessary, place the mount strap at the rear of the unit and fix it with provided washer asfigure 2. Push the unit into the Half Sleeve until you hear a click sound. Place Trim Ring over the unit and installation is completed as figure 3. (Some vehicle maynot need Trim Ring)UN-INSTALLATIONInsert the supplied extraction keys into the unit and pull the unit out with keeping the extractionkeys. (as Figure. 4)