Farenheit TID-535 Owner's Manual

Farenheit TID-535 Owner's Manual Manual pdf 21 page image

20TV SECTION (For NSD-535T only)To enter TV mode, you can tap TV icon on main menu screen or press mode on front panel orremote.1. Connect TV antenna to the TV ANT wire in rear unit, and then press MODE button on frontpanel or remote to select TV mode or Tap TV icon on main menu screen to enter TV mode.2. In TV mode, press the Play/Pause buttons on front panel or remote once to enter TV menusetting, or press touch screen to choose TV MENU icon to enter TV MENU.3. Press the / on remote or tap the screen to select one of the setup pages: Auto program =>Manual program.4. Press the ENTER button on remote or tap “Auto program or Manual program” on screen toenter the page.5. Press the / on remote buttons or tap relevant option to select the setting.6. Press ENTER on the remote again to confirm, tap BACK to return to the setup page.7. Press the △/ ▽Icon to adjust TFT angle.8. Press the icon to be back to main menu.Note: This function is available when TV tuner is connected.TV MENUAuto program (Auto seek mode) SystemSelect this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button onremote or tap the screen to select. AudioSelect this menu item is to set the TV sound system:when system setting PAL,TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER onremote or tap the screen button to select.When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on remoteor tap the screen button to select.When system setting NTSC, press button to automatic skip search term. SearchSelect this menu item is to start searching and storing stations automatically.Manual program (manual seek mode) StorageSelect this menu item is to set the storage number.