Farenheit TID-893 Owner's Manual

Contents

Farenheit TID-893 Owner's Manual Manual pdf 21 page image

21Back View CameraThis unit is equipped with back view camera output. The camera is used to observe thesituation behind the vehicle when you are backing the car.Please connect your back view camera with the back car video input. And connect the reversewire for back a car with the rear gear light. Rear view camera picture will be enabled when youare backing the car.BLUETOOTH SECTION（FOR TID-893B ONLY）Warning: Driving and having a Telephone conversation at the same time is dangerous, pleasepark your car before having a telephone conversation. The supplier waves any and all liabilitywhen this warning is not followed.To enter Bluetooth mode, you can tap Bluetooth icon on Main menu or long press themute/Bluetooth button on the Remote Control or press mode button on remote or on frontpanel.BT Main MenuBluetooth disconnect mode Bluetooth connect modeA user can make own choice by tap the buttons.Tap CALLING button to use phone functions.Tap MUSIC button to start BLUETOOTH music player .Tap HISTORY button to check dialed, received, missed calls .Tap PHONEBOOK button to use phone book functions.Pairing ModeAt the 1st time when using BLUETOOTH, you need to pair the mobile phone first.When a phone have not been paired with the unit, the BT icon and Pairing mark will blinkcontinually on the panel.When the unit have connect with phone ,the BT icon will turn on and the Mobile phone name (ifavailable) will be display on the panel.According to mobile pairing device manual, after searching new device (Farenheit), select it,input password "0000" and confirm ok, device paring is finished.The text ‘Enter Number’ will shows on the panel after the pairing is completed. It means deviceis connected and ready for BLUETOOTH communication.Auto-connect - DisconnectWhen power on the unit, the last paired phone will be connected to the device via Bluetoothautomatically, after searching about one minute, if the device cannot find the paired phone, itwill stop searching. When in standby mode (unconnected), long press Bluetooth button onremote control to active auto-connect function and the device will search the last paired phone.If you want to disconnect the Bluetooth connection, tap the Pairing icon PAIRING button onBluetooth main menu, and select phone book paring.1.CALLING BUTTON