Farenheit TID-894NRBT Operating Manual

1SAFETY INFORMATIONPLEASE READ COMPLETELY AND BECOME FAMILIAR WITH THE CONTENTSOF THIS MANUAL BEFORE INSTALLATION AND OPERATION OF THIS UNIT,AND KEEP IT CAREFULLY FOR FUTURE REFERENCE.This unit is a class 1 laser product. The laser beam may cause hazardousradiation if exposure to laser system directly. Do not attempt to disassemble theunit personally.This unit has been designed and manufactured to assure personal safety. Improperuse can result in electric shock or fire hazard. The safeguards incorporated in thisunit protect you if you observe the following procedures for installation, use andservicing. This unit doesn't contain any parts that can be repaired by the user. If theunit requires maintenance, contact an authorized service center.Warnings-Do not expose the product to rain, water or excessive moisture. This could causeelectrical shorts, fire or other damage.-This product is designed to operate with a 12 volt DC, negative ground batterysystem. Use the proper power supply.-The monitor is operated automatically. Do not push in or pull out the monitor or try toreverse the monitor manually! Do not attempt to adjust the monitor angle upward ordownward manually. It will cause damage to the Monitor Mechanism Structure.-Do not impact the monitor with a hard object. It may cause permanent damage.-Do ground all equipments and works in order to avoid causing damage to the unitby electrostatic discharges.-The user who handles this product takes all necessary precautions to avoid ESD(Electro-Static Discharge) failures.-Do not attempt to install or service your unit by yourself. Installation or servicing ofthe unit by persons without training and experience in electronic equipment andautomotive accessories may be dangerous and could expose you to the risk ofelectric shock or other hazards.Downloaded from Caradio-Manual.com Manuals