Farenheit TID-897NRT Owner's Manual

Contents

- 17 -15. EjectPress to eject / load a disc.16. RESETPress and hold this button to switch back to all the original factory settings.Keep in mind this will erase all your preset radio stations and any EQ settings youmay have made and saved.ٛ17. ANGLE + / END CALL / 18. ANGLE + / CALLAdjust the view angle of the monitor to choose the best displaying effect.1- Continual angle adjustmentHold on pressing the [ANGLE +] / [ANGLE -] buttons to adjust the angle of TFTmonitor upward / downward by continual increasing / decreasing.2- Single step angle adjustmentPress the [ANGLE +] / [ANGLE -] buttons to adjust the angle of TFT monitor upward /downward by singly increasing / decreasing.Bluetooth Mode, press the [CALL] button to receive a cell phone call, press the [ENDCALL] button to reject or hang up a call.19. DISPLAYPress to display the current playback information.20. OPEN / CLOSEWhen unit power off, press the [OPEN] button to turn unit on and the monitor willspread out and turn around to the last angle position.When unit power on, press the [OPEN] button, the monitor will spread out and turnaround to the last angle position; Press the [CLOSE] button, the monitor will turndownward and completely retract in.21. OUT / 22. INPress the [OUT] / [IN] buttons to move the monitor forward / backward by singly step.There are 2 steps to move the monitor forward / backward totally.NAVI mode, hold on pressing the [OUT] / [IN] buttons to decrease / increase thebrightness of panel.23. MENUPress to return the main menu.Hold on pressing the button to enter the SYSTEM SETUP page.24. NAVI / SYSTEMPress to enter / exit the NAVI mode.Hold on pressing to enter / exit the System Parameter Setup menu.Protection of the TFT MonitorDuring the movement of the TFT monitor, if it is halted by force, then the unit willbegin self-protection to prevent from any damage on the motorized mechanicalstructure.Press the [OPEN] button or shut down the ACC and then restart, the TFT monitor willact as the follow list to recover; if not, then please consult with an authorized servicecenter.Downloaded from Caradio-Manual.com Manuals