67LMMMMM 2M MMMMMMM MMfMLMMMFMMMM3D X M30 MMM X 330 • MCENE 5.3MMpMMmbMM 20M4AMMMvMMy M.6MMMMMMMM CMmmMM MMMM PMMMmMMMMMIn this activity, you will adjust the RMMMMMMMMM and QMMMMMysettings, turn MMMM LMMM CMMMM on or off, and note how thesesettings affect MMMM DMMMMMMM and PMMMM DMMMMMMM.Given the settings in the table, determine the MMMM DMMMMMMMand PMMMM DMMMMMMM and write the values in the table.(See Appendix 1 for answers.)RMMMMMMMMMMMMMMMMQMMMMMyMMMMMMMMMMMLMMMCMMMMMMMMDMMMMMMM[hh:mm:ss]*PMMMM DMMMMMMM[mm at 10 m] [in at 30 ft]1/1 4x Off1/1 4x On1/4 4x Off1/4 4x On1/4 8x Off1/4 8x On1/8 4x Off1/8 4x On1/8 2x Off1/8 2x On*When the MMMM DMMMMMMM is greater than an hour, seconds are not displayed; the formatchanges from mmMMM to MMMmm. The scan durations are approximate and are based onvalues displayed on the RMMMMMMMMM / QMMMMMy screen on the Focus 3D X 330.Follow these steps:1. Adjust the RMMMMMMMMM and QMMMMMy settings.A. From the LMmM screen, tap PMMMmMMMMM >RMMMMMMMMM [MPMM] QMMMMMy.B. Use the sliders or the buttons above and below thesliders to adjust the settings.Slides 72-76
