Safety regulationsBOMAG14 BT 60/4 BT 65/4Working on the fuel systemNo open fire, do not smoke, do not spill any fuel.Catch running out fuel, do not let it seep into theground and dispose of environmentally.Do not breath in fuel fumes.Working on the engineWhen working on the fuel filter make sure that nodirt falls into the air channel.Do not work on the hot exhaust, risk of burns!When working on the exhaust channel of the en-gine make sure that no combustion residues fallinto the cylinder.Do not touch the piston with the cleaning tools.Working on the tamper footWipe off spilled oil, catch running out oil and dis-pose of environmentally.Store oily material in a specially marked containerand dispose of environmentally.CleaningDo not clean the machine while the engine is run-ning.Do not use gasoline or other inflammable sub-stances to clean the machine.When using steam cleaning equipment do notsubject electric parts and insulating material to thedirect water jet or cover them beforehand.Do not guide the water jet directly into the air filter,into the exhaust or into the air intake opening.After the maintenance workReinstall all protective devices after completingmaintenance.RepairRepairs must only be carried out by qualified andauthorized personnel. Always follow our repair in-structions.Exhaust gases are highly dangerous! Always en-sure an adequate supply of fresh air when startingin closed rooms!Attach a warning tag to the steering bow if the ma-chine is defective.l Do not mix the nozzle in the carburettor up bymistake.l Adjust the idling speed regulator screw exact-ly.l Do not damage the blower wheel when work-ing on the magnetic ignition.l Always replace self locking nuts.l Do not open the foot cover on the tamper foot,spring tension. Danger of accident!l Observe the prescribed tightening torques.Go to Discount-Equipment.com to order your parts