DisassemblyLet the air out of the sponsons. Remove Cockpit Coaming.Remove Gunwale and Chine Connector bars. Install Stern DeckBar into Keel Extension Bar. Take up tension with the Lever inorder to remove the Keel Extension Bar. Follow the rest of theassembly steps in reverse order.Packing the kayak in the bagPut the seat cushion in the bag first, with the cushion facingdown, to give padding for your back. Next arrange the whiteplastic crossribs over the seat. Stretch the sprayskirt over thefibreglass coaming. Place this in the bag, over the crossribs.Roll the kayak skin up tightly–fold the ends to the center of thekayak; fold in half; roll tightly; secure with webbing ties. Placethis bundle in one side of the bag. Put aluminum frame partsalong side of the rolled up skin. Tuck all additional pieces(ie: sea sock, repair kit) into any available space.Lifting the KayakThe webbing handles at the bow and stern ends can be usedto lift or carry. Never lift or car ry a fully loaded kayak.StorageOnce clean and dry, the kayak can be stored assembled ordisassembled in a shaded, dry place. When storing the kayakdisassembled, take extension bar apart.Feathercraft K-Light Plus 7