Feig Electronic ID ISC.PRH101-A Installation Manual

Also see for ID ISC.PRH101-A: Installation manual

Contents

Feig Electronic ID ISC.PRH101-A Installation Manual Manual pdf 10 page image

OBID i-scan ® Installation ID ISC.PRH101FEIG ELECTRONIC GmbH Page 10 of 18 M50800-0e-ID-B.doc4.2. Reader with Bluetooth™ interface ID ISC.PRH101-BThe Reader has a Bluetooth port. The supply voltage is provided only by rechargeable batteries.The Reader is activated using the Scan button. This opens a Bluetooth connection automaticallywithin approx. 3 seconds. The Reader is now ready to use. After releasing the button, the Readerremains active for several minutes. During this time the Bluetooth connection remains open.Pressing the button again immediately starts a Scan.4.2.1. Bluetooth™(BT) interfaceCommunication to the Reader is through a Bluetooth connection. Bluetooth is a short-distancewireless RF connection which enables permanent wireless communications connections betweenportable and desktop or peripheral devices. Each Bluetooth device has a unique address and canbe optionally identified with a self-explanatory name. Password protection is used for security of aBluetooth connection, with the Bluetooth partner being added to a confidential list. SSP (Serial PortProfile) is used.Initial setup of a „paired connection“ to the Reader is done by the host. After initial setup thishappens automatically by pressing the button.All Readers have a factory set name and a preset password. The name "OBID_PRH101B"consists of a fixed (OBID_PRH) and a user modifiable (101B) part.Description Default settingName variable 101BPassword 1234Table 6: Standard configuration of the Bluetooth Interface